Woodstock Ideal Steel Hybrid 210 wood stove

Woodstock Soapstone rates the Ideal Steel Hybrid 210 for Up to 2,200 sq ft with an output of 43,263 BTU/h (top of the EPA 2020 cordwood test range). The firebox holds 3.2 cubic feet, #4 by size of the 20 stoves listed here, and particulate emissions are 0.89 g/h, 45% of the EPA's 2 g/h limit.

1Heating area Up to 2,200 sq ft
2Output 43,263 BTU/h
3Firebox 3.2 cu ft
4Particulate 0.89 g/h

Specification	Woodstock Ideal Steel Hybrid 210
Heating area	Up to 2,200 sq ft
Output	43,263 BTU/h (top of the EPA 2020 cordwood test range); low 9,323 BTU/h
Efficiency	77% HHV (HHV efficiency)
Particulate emissions	0.89 g/h
Firebox	3.2 cu ft
Log length	up to 22 in
Flue	6 in
Weight	620 lb (stove weight)
Burn time	10 to 14 hours

Published output of the Woodstock Ideal Steel Hybrid 210 and the four listed stoves closest to it. Makers define the figure differently (maximum, top of the EPA test range, or constant output on High); each stove's page says which. Bars to scale from zero.

What the Ideal Steel Hybrid 210 heats

On this site's floor-area pages the Ideal Steel Hybrid 210 appears for the up to 1,200 sq ft and 1,200 to 2,000 sq ft and 2,000 sq ft and up bands. At its top rating of 2,200 sq ft, a 1970s house in Oregon needs about 33,054 BTU/h on a 0°F night, below the stove's 43,263 BTU/h. The same floor area built before 1950 in North Dakota needs about 42,293 BTU/h, which the published output still covers.

Floor area	1970s house, Oregon	Pre-1950, North Dakota	Within 43,263 BTU/h?
1,000 sq ft	15,024	19,224	Both
1,500 sq ft	22,537	28,836	Both
2,000 sq ft	30,049	38,448	Both
2,500 sq ft	37,561	48,061	Median state only

These are estimates from average use, not a heat-loss calculation of a real house, and a stove heats the room it stands in first. The Ideal Steel Hybrid 210 runs from 9,323 to 43,263 BTU/h, a 4.6-to-1 range, which helps in mild weather when a big stove would otherwise be turned down and smoulder.

Wood it burns in a winter

With its published 77% efficiency, heating 2,200 sq ft (built in the 1970s) on generic 20 million Btu cords takes about 4.2 cords in Oregon and 7.3 cords in North Dakota. It takes logs up to 22 in, so standard 16-inch face-cord wood fits; University of Maryland Extension suggests cutting wood about 3 inches shorter than the firebox. The maker quotes 10 to 14 hours per load.

The species that burn best in any stove are the dense hardwoods Utah State rates excellent overall: osage-orange (30.5), black locust (28.3), white oak (27.9), apple (27), bur oak (26.3) million Btu per cord. Burn them dry; see how to season firewood.

Emissions and EPA rules

At 0.89 g/h the Ideal Steel Hybrid 210 is 45% of the EPA's May 15, 2020 limit of 2 g/h and 36% of the 2.5 g/h limit for stoves certified on cord wood. It is a catalytic design. The EPA rules guide explains the limits.

Similar stoves

Drolet Fox: 45,000 BTU/h, 250–1,200 sq ft
Woodstock Keystone 204: 46,437 BTU/h, 800–1,300 sq ft
Woodstock Fireview 205: 46,460 BTU/h, 900–1,600 sq ft
Woodstock Progress Hybrid 209: 47,220 BTU/h, Up to 2,200 sq ft

Source: Woodstock Soapstone Co., Ideal Steel Hybrid wood stove page, checked 2026-10-20. Ratings are the maker's own; installation clearances and permits follow the installation manual and local code. See the methodology.