Firewood by species / Hardwood

Extension tables · checked 2026-10-20

Basswood firewood

A cord of basswood holds about 15.2 million Btu of heat, according to the University of Kentucky forestry table (at 20% moisture content). That ranks it #48 of 52 species on this site, 24% less than the 20 million Btu the U.S. Energy Information Administration uses for a generic cord of wood.

1234
  1. 1Heat per cord 15.2 million Btu
  2. 2Rank of 52 #48
  3. 3Dry weight 1,984 lb/cord
  4. 4Splitting Easy
Heat per cord
15.2 million Btu
Rank
#48 of 52
Same heat as
110 gal oil
Dry weight
1,984 lb/cord
Spruce15.5 M BtuBasswood15.2 M BtuEngelmann spruce15 M BtuWhite pine15 M BtuWhite fir14.6 M BtuEIA mixed cord20 M Btu
Heat per cord, million Btu: Basswood against the four species closest to it and the U.S. EIA's 20 million Btu figure for a cord. Basswood uses the Kentucky (20% moisture) value. Bars to scale from zero.

How much heat is in a cord of basswood?

The two extension tables used here disagree by 1.4 million Btu: Kentucky lists 15.2 and Utah State lists 13.8 (as "Basswood (Linden)"). The figures are close, so either one gives nearly the same answer in the calculator. Cord Calc uses Kentucky's figure because its table states the moisture basis (20%). It sits 5.6 million Btu below the median species (20.75), and it is #37 of the 38 hardwoods listed, whose average is 22.1 million Btu.

One cord of gambel oak, the highest in the table, holds as much heat as 2.02 cords of basswood. In the other direction, a cord of basswood replaces 1.1 cords of buckeye (horsechestnut), the lowest. In energy terms one cord equals the heat content of about 110 gallons of heating oil, using EIA's 138,500 Btu per gallon; the stove and the oil burner each lose some of that before it reaches the room.

Cords of basswood for a winter

For the example house used across this site (2,000 sq ft, built in the 1970s, wood as the only heat, a 74% efficient stove), a normal winter takes:

StateDegree daysBasswoodGeneric cord (20 M Btu)
North Dakota (coldest)9,1849.1 cords6.9 cords
Oregon (median)5,2695.2 cords3.9 cords
Florida (mildest)6460.6 cords0.5 cords

Because basswood falls short of the generic cord, the stack is 32% larger than the same winter on average wood: more splitting, carrying and stacking for the same heat. Your own house will differ; the calculator takes your state, floor area, house age and price.

Weight, splitting and how it burns

Whatever the species, the heat figures assume dry wood. Seasoned firewood is below 20% moisture; fresh-cut wood is 35 to 50% water by weight (CMHC), and burning it wastes heat boiling that water off. The seasoning guide and the moisture meter guide explain how to get there and check it.

What a cord of basswood is worth

Maine's Governor's Energy Office surveyed dealers at $355 a cord on September 21, 2026 (seasoned wood, minimum 2-cord purchase, local delivery included). Paid for as basswood, that is $23.36 per million Btu in the wood, or $31.56 per million Btu delivered by a 74% stove. At a flat per-cord price, a light species like this costs noticeably more per unit of heat; it is worth paying less for it, or using it for kindling and shoulder-season fires. Only two states publish a dated cord price; see Maine and New Hampshire.

Similar species

Compare every species on the firewood BTU chart, or see what a cord, face cord and rick hold before you buy.

Sources: University of Kentucky Forestry, Comparison of Properties Affecting Firewood (row "Basswood"); Utah State University Extension Forestry, Wood Heating (Kuhns and Schmidt), Table 1 Firewood Facts (row "Basswood (Linden)"). Last checked 2026-10-20. Price: Maine Governor's Energy Office, 2025-2026 Heating Season Weekly Fuel Prices (September 21, 2026). Method: methodology.